I have heard that the number of legs a horse has in the air in a statue indicates … the air of a horse statue indicate how its rider … to come up with a …
A significant number of horse statues in Washington, D.C. and in London, England, do not follow these alleged protocols regarding leg location on a horse statue. The U.S. and the U.K. are the two countries in which the contentions about horse leg statue positions are most prevalent.
In Tacca's sculpture, atop a fountain composition that forms the centerpiece of the façade of the Royal Palace, the horse rears, and the entire weight of the sculpture balances on the two rear legs, and discreetly, its tail, a novel feat for a statue of this size.
A statue of a horse and rider in that attitude is intended to make the rider (usually some General) appear more heroic. In reality, that General was probably well to the rear of all the action in every battle, watching from the top of a hill.
On a statue of a horse and rider, the number of legs in the air reveals information about how the rider died: both legs in the air means they died during a battle, one leg in the air means they died later of wounds inflicted during a battle.
At Gettysburg, a statue that has all four of the horse’s hooves on the ground means that the rider survived the battle without a scratch. One foot raised means the person was wounded but survived, and both forelegs raised indicates that the man was killed at Gettysburg.
If a statue depicting a person on a horse with both front legs in the air, … one front leg up means the rider was wounded in battle or died of battle wounds; …
… statues of soldiers mounted on horses with … legs are on the ground, the rider … two hooves raised), the odds that a rider’s …
The Horse Statue Code. There is a commonly held belief that equestrian statues follow a sort of code, … Two Hooves – If two hooves are raised the rider died in …
a statue of a person riding a horse: horse has 2 front feet up in … of horse's legs on a statue tell how the person … horse and rider statues, …
Material: The material of the statue is then decided by the client. The sculptor may also use a small clay model to better portray his conception of the design. The clay model can be modified to fine tune the client’s wishes.
Mini-Sculpture: Finally, the bronze sculpture artist may finalize the miniature model of the final design in order to give the client a preview into how the final product will look. This model is made using the material decided, and it can be used by the client for marketing purposes so that he can raise funds for the sculpture.
Creating the Backbone: The backbone of the bronze statue, also called the armature consists of a steel frame with foam added to it in order to resemble the rough outline of the final product. This is then sealed with a latex coat to secure it.
The Sculpting: The main work starts only now. Many pounds of hot clay are used and applied by hand to “block in” the design for the first time. The bronze sculpture artist then invests a lot of time adding more clay, removing some clay and molding the clay until the final product finally resembles the required design. Tiny details are added on to give more preciseness to the bronze statue and make it more real.
Remove dust with a damp cloth.
Do not use metal objects or wire brushes to clean the sculpture.
Do not apply abrasives or cleansers that will possibly scratch the finish.
ZUD – Non- Abrasive Cleaner. Use to remove stubborn stains. Zud cleans all metal surfaces including bronze. Zud can be used in powder or liquid form.
Lemon Oil – Apply a small amount of oil with a paintbrush or soft cloth. Cover the entire figure with oil. Wipe the surface gently with a soft cloth to take off the excess oil.
Paste Wax- A very thin, even coat of wax should be applied with a soft cloth. Allow the wax to sit and dry before polishing. Wax should be applied after bronze has been cleaned and dried. Do not apply if using lemon oil.
Do Nothing: Many bronze owners prefer to sit back and enjoy the natural reaction and aging process of their sculpture.
What kind of sculpture is right for me?
We have a tremendous inventory of existing designs and unique items that we have been collecting for many years. After reviewing the website, Contact Us if you are unable to find what you are looking for.
Ancient Sculpture Gallery is proud to present you with lost wax bronze reproductions of statues and busts from the Egyptian, Greek, Hellenistic, Roman, Asian Oriental, and Western civilizations. “Lost Wax” bronze (or hot-cast bronze) is actually 100% pure Bronze – essentially copper and tin. The making of a “lost wax” bronze is a complex and time consuming process, and specific technical expertise is needed to accomplish the task of making a bronze. The most known and used process for making “lost wax” involves pouring of molten bronze. This is the same method used by the ancient civilizations to create bronze sculptures. Our lost wax bronze sculptures are produced in this same technique.