The Equestrian Statue of Marcus Aurelius is an ancient Roman statue in the Capitoline Hill, Rome, Italy.It is made of bronze and stands 4.24 m (13.9 ft) tall. Although the emperor is mounted, it exhibits many similarities to standing statues of Augustus.
Equestrian Sculpture of Marcus Aurelius, bronze, c. 173-76 C.E. (Capitoline Museums, Rome). The original location of the sculpture is unknown. Beginning in the 8th century, it was housed in the Lateran Palace, until it was placed in the center of the Piazza del Campidoglio in 1538 by Michelangelo …
Equestrian Statue of Marcus Aurelius, c. 173-76 C.E. gilded bronze (Capitoline Museums, Rome).The original location of the sculpture is unknown. Beginning in the 8th century, it was located near the Lateran Palace, until it was placed in the center of the Piazza del Campidoglio in 1538 by Michelangelo.
The equestrian statue of Marcus Aurelius is 4,24 m high and 3,87 m long. The material of use is hollow-cast gilded bronze.[] In the middle of a public square, it stands on a pedestal.
The calotype process allowed multiple prints to be made from a single paper negative, representing an advance on the daguerreotype process, which produced a single image. The subject of Jones’s salt print, the equestrian monument of Marcus Aurelius, is the centerpiece of the Piazza del Campidoglio.
Roman Art – Midterm. STUDY. PLAY. … -Modern day take more from these types of buildings than their greek-countertypes … Equestrian Statue of Marcus Aurelius
The equestrian monument of the emperor Marcus Aurelius (II century A.D.) is experimentally examined. The strain fields and the displacements of the statue of the horse, determined by the load of …
The 3.52 m high gilded-bronze equestrian statue of Marcus Aurelius is one of the most imposing bronze statues surviving from antiquity. It was probably erected between 176-180 CE at an unknown location in Rome.
Start studying Ch 3 Empire: The Power and Glory of Rome. … Longstanding influence of this is apparent in the design of the modern sports arena … Equestrian Statue …
In etching on the other hand, the artist uses a chemical process in which the plate is first covered with an acid resistant ground and then worked with an etching needle. One reason proposed to explain the differences between his Vedute and the town views of his contemporaries was his particular method.
Material: The material of the statue is then decided by the client. The sculptor may also use a small clay model to better portray his conception of the design. The clay model can be modified to fine tune the client’s wishes.
Mini-Sculpture: Finally, the bronze sculpture artist may finalize the miniature model of the final design in order to give the client a preview into how the final product will look. This model is made using the material decided, and it can be used by the client for marketing purposes so that he can raise funds for the sculpture.
Creating the Backbone: The backbone of the bronze statue, also called the armature consists of a steel frame with foam added to it in order to resemble the rough outline of the final product. This is then sealed with a latex coat to secure it.
The Sculpting: The main work starts only now. Many pounds of hot clay are used and applied by hand to “block in” the design for the first time. The bronze sculpture artist then invests a lot of time adding more clay, removing some clay and molding the clay until the final product finally resembles the required design. Tiny details are added on to give more preciseness to the bronze statue and make it more real.
Remove dust with a damp cloth.
Do not use metal objects or wire brushes to clean the sculpture.
Do not apply abrasives or cleansers that will possibly scratch the finish.
ZUD – Non- Abrasive Cleaner. Use to remove stubborn stains. Zud cleans all metal surfaces including bronze. Zud can be used in powder or liquid form.
Lemon Oil – Apply a small amount of oil with a paintbrush or soft cloth. Cover the entire figure with oil. Wipe the surface gently with a soft cloth to take off the excess oil.
Paste Wax- A very thin, even coat of wax should be applied with a soft cloth. Allow the wax to sit and dry before polishing. Wax should be applied after bronze has been cleaned and dried. Do not apply if using lemon oil.
Do Nothing: Many bronze owners prefer to sit back and enjoy the natural reaction and aging process of their sculpture.
What kind of sculpture is right for me?
We have a tremendous inventory of existing designs and unique items that we have been collecting for many years. After reviewing the website, Contact Us if you are unable to find what you are looking for.
Ancient Sculpture Gallery is proud to present you with lost wax bronze reproductions of statues and busts from the Egyptian, Greek, Hellenistic, Roman, Asian Oriental, and Western civilizations. “Lost Wax” bronze (or hot-cast bronze) is actually 100% pure Bronze – essentially copper and tin. The making of a “lost wax” bronze is a complex and time consuming process, and specific technical expertise is needed to accomplish the task of making a bronze. The most known and used process for making “lost wax” involves pouring of molten bronze. This is the same method used by the ancient civilizations to create bronze sculptures. Our lost wax bronze sculptures are produced in this same technique.