The Equestrian Statue of Marcus Aurelius is one of the most important surviving works of Roman art, and the best example we have of ancient equestrian portraits. All hail the emperor! All hail the …
The Equestrian Statue of Marcus Aurelius is an ancient Roman statue in the Capitoline Hill, Rome, Italy.It is made of bronze and stands 4.24 m (13.9 ft) tall. Although the emperor is mounted, it exhibits many similarities to standing statues of Augustus.
Digital Imaging Project: Art historical images of architecture and sculpture from Prehistoric to Post-modern art. Scanned from slides taken on site by Mary Ann Sullivan, Bluffton University. Equestrian Statue of Marcus Aurelius in the Capitoline Museum, Rome
Analysis of Equestrian Statue of Marcus Aurelius … thin bridle with large metal circlets. … Marcus Aurelius and Commodus were men that ruled the empire of Rome …
For instance, Marcus Aurelius died of natural causes, though his horse was cast with a leg up in the air. Another example is the equestrian statue of Andrew Jackson, the 7 th President of the United States, in Washington.
Equestrian Statue of Marcus Aurelius. … the rider was correctly re-identified as the Roman emperor Marcus Aurelius (reigned 161-180), particularly respected by …
Analysis of Equestrian Statue of Marcus Aurelius Essay Sample. Strongly built small horse. Wide and large intelligent eyes. Frozen in a Piaffe which requires extreme discipline on both the rider and horses part. Simple tack- embroidered rug, thin bridle with large metal circlets.
Some art historians reconstruct a now-missing barbarian on the right side of the horse, as seen in a surviving panel relief sculpture that originally belonged to a now-lost triumphal arch dedicated to Marcus Aurelius (left).
The saddle cloth is actually Sarmatian in origin, suggesting that the horse is a Sarmatian horse and that the statue was created to honour the victory over the Sarmatians by Marcus Aurelius, after which he adopted "Sarmaticus" to his name.
-Most ancient bronze statues were melted down for their metal value during the Middle Ages, but this happened to have survived-Marcus possesses a superhuman grandeur and is much larger than any normal human would be in relation to his horse.
Material: The material of the statue is then decided by the client. The sculptor may also use a small clay model to better portray his conception of the design. The clay model can be modified to fine tune the client’s wishes.
Mini-Sculpture: Finally, the bronze sculpture artist may finalize the miniature model of the final design in order to give the client a preview into how the final product will look. This model is made using the material decided, and it can be used by the client for marketing purposes so that he can raise funds for the sculpture.
Creating the Backbone: The backbone of the bronze statue, also called the armature consists of a steel frame with foam added to it in order to resemble the rough outline of the final product. This is then sealed with a latex coat to secure it.
The Sculpting: The main work starts only now. Many pounds of hot clay are used and applied by hand to “block in” the design for the first time. The bronze sculpture artist then invests a lot of time adding more clay, removing some clay and molding the clay until the final product finally resembles the required design. Tiny details are added on to give more preciseness to the bronze statue and make it more real.
Remove dust with a damp cloth.
Do not use metal objects or wire brushes to clean the sculpture.
Do not apply abrasives or cleansers that will possibly scratch the finish.
ZUD – Non- Abrasive Cleaner. Use to remove stubborn stains. Zud cleans all metal surfaces including bronze. Zud can be used in powder or liquid form.
Lemon Oil – Apply a small amount of oil with a paintbrush or soft cloth. Cover the entire figure with oil. Wipe the surface gently with a soft cloth to take off the excess oil.
Paste Wax- A very thin, even coat of wax should be applied with a soft cloth. Allow the wax to sit and dry before polishing. Wax should be applied after bronze has been cleaned and dried. Do not apply if using lemon oil.
Do Nothing: Many bronze owners prefer to sit back and enjoy the natural reaction and aging process of their sculpture.
What kind of sculpture is right for me?
We have a tremendous inventory of existing designs and unique items that we have been collecting for many years. After reviewing the website, Contact Us if you are unable to find what you are looking for.
Ancient Sculpture Gallery is proud to present you with lost wax bronze reproductions of statues and busts from the Egyptian, Greek, Hellenistic, Roman, Asian Oriental, and Western civilizations. “Lost Wax” bronze (or hot-cast bronze) is actually 100% pure Bronze – essentially copper and tin. The making of a “lost wax” bronze is a complex and time consuming process, and specific technical expertise is needed to accomplish the task of making a bronze. The most known and used process for making “lost wax” involves pouring of molten bronze. This is the same method used by the ancient civilizations to create bronze sculptures. Our lost wax bronze sculptures are produced in this same technique.