Giant Horse The Equestrian Monument to Francesco Sforza One of the biggest and most important projects that ever occupied Leonardo was the Equestrian Monument to Francesco Sforza , the father of Duke Ludovico Sforza of Milan.
Leonardo's Horse statue, an imagined version of which stands in Milan's Cultural Park, was never actually made. Photograph: Antonio Calanni/AP It is a bad time to be making a giant horse.
Leonardo's Horse (also known as Gran Cavallo) is a sculpture that was commissioned of Leonardo da Vinci in 1482 by Duke of Milan Ludovico il Moro, but not completed.It was intended to be the largest equestrian statue in the world, a monument to the duke's father Francesco.
In 1482, Ludovico Sforza, Duke of Milan, challenged Leonardo Da Vinci to build the largest equestrian statue the world had ever seen in honor of his father, Francesco.
Tallest and largest equestrian statue. The monument to general Jose Gervasio Artigas in Minas, Uruguay (18 meters tall, 9 meters long, 150,000 kg) was the world's largest equestrian statue until 2009.
Leonardo worked on the project for the greatest equestrian monument of all times from 1482 to 1499: he virtually completed the original, in plaster, ready for casting, but the great sculpture was destroyed by the French invaders who ousted Leonardo’s patron, Ludovico il Moro, from power.
Milan, Da Vinci's Horse, Da Vinci's Museum The largest equestrian monument in the world, done in 1999 based on a model by Leonardo Da Vinci, which was destroyed in 1499. It is a 15 ton, 24 foot model.
Nope, it’s not the replica of Leonardo da Vinci’s original masterpiece, its way bigger than that. This is a statue revering a Mongolian legend & equestrian extrodinare, Genghis Khan. This is a statue revering a Mongolian legend & equestrian extrodinare, Genghis Khan.
In 1482, Leonardo's Milanese patron, Duke Lodovico Sforza, commissioned him to design and build a colossal horse, which would have been the largest equestrian statue in the world.
Il Cavallo's story spans five centuries, beginning in 1482, when Ludovico Sforza, the Duke of Milan and Leonardo's patron, commissioned an equestrian statue in honor of his father. Leonardo worked on the statue for 17 years, completing a 24-foot-tall clay sculpture that was to be cast in bronze.
Material: The material of the statue is then decided by the client. The sculptor may also use a small clay model to better portray his conception of the design. The clay model can be modified to fine tune the client’s wishes.
Mini-Sculpture: Finally, the bronze sculpture artist may finalize the miniature model of the final design in order to give the client a preview into how the final product will look. This model is made using the material decided, and it can be used by the client for marketing purposes so that he can raise funds for the sculpture.
Creating the Backbone: The backbone of the bronze statue, also called the armature consists of a steel frame with foam added to it in order to resemble the rough outline of the final product. This is then sealed with a latex coat to secure it.
The Sculpting: The main work starts only now. Many pounds of hot clay are used and applied by hand to “block in” the design for the first time. The bronze sculpture artist then invests a lot of time adding more clay, removing some clay and molding the clay until the final product finally resembles the required design. Tiny details are added on to give more preciseness to the bronze statue and make it more real.
Remove dust with a damp cloth.
Do not use metal objects or wire brushes to clean the sculpture.
Do not apply abrasives or cleansers that will possibly scratch the finish.
ZUD – Non- Abrasive Cleaner. Use to remove stubborn stains. Zud cleans all metal surfaces including bronze. Zud can be used in powder or liquid form.
Lemon Oil – Apply a small amount of oil with a paintbrush or soft cloth. Cover the entire figure with oil. Wipe the surface gently with a soft cloth to take off the excess oil.
Paste Wax- A very thin, even coat of wax should be applied with a soft cloth. Allow the wax to sit and dry before polishing. Wax should be applied after bronze has been cleaned and dried. Do not apply if using lemon oil.
Do Nothing: Many bronze owners prefer to sit back and enjoy the natural reaction and aging process of their sculpture.
What kind of sculpture is right for me?
We have a tremendous inventory of existing designs and unique items that we have been collecting for many years. After reviewing the website, Contact Us if you are unable to find what you are looking for.
Ancient Sculpture Gallery is proud to present you with lost wax bronze reproductions of statues and busts from the Egyptian, Greek, Hellenistic, Roman, Asian Oriental, and Western civilizations. “Lost Wax” bronze (or hot-cast bronze) is actually 100% pure Bronze – essentially copper and tin. The making of a “lost wax” bronze is a complex and time consuming process, and specific technical expertise is needed to accomplish the task of making a bronze. The most known and used process for making “lost wax” involves pouring of molten bronze. This is the same method used by the ancient civilizations to create bronze sculptures. Our lost wax bronze sculptures are produced in this same technique.