The equestrian statue of Marcus Aurelius is 4,24 m high and 3,87 m long. The material of use is hollow-cast gilded bronze.[] In the middle of a public square, it stands on a pedestal.
Equestrian Sculpture of Marcus Aurelius, c. 173-76 C.E., bronze (Capitoline Museums, Rome) Few examples of these equestrian statues survive from antiquity, however, making the Equestrian Statue of Marcus Aurelius a singular artifact of Roman antiquity, one that has borne quiet witness to the ebb and flow of the city of Rome for nearly 1,900 years.
Analysis of Equestrian Statue of Marcus Aurelius Essay Sample. Strongly built small horse. Wide and large intelligent eyes. Frozen in a Piaffe which requires extreme discipline on both the rider and horses part.
Equestrian Statue of Marcus Aurelius, c. 173-76 C.E. gilded bronze (Capitoline Museums, Rome).The original location of the sculpture is unknown. Beginning in the 8th century, it was located near the Lateran Palace, until it was placed in the center of the Piazza del Campidoglio in 1538 by Michelangelo.
Marcus Aurelius was born on April 20, 121 AD into a family of royalty. His uncle and adoptive father, Antoninus Pius, was the emperor of Rome. Aurelius, too, was trained from birth to be a great ruler like his father.
The Equestrian Statue of Marcus Aurelius is a gilded bronze portrait of the Roman emperor on horseback. It was likely created in the 170s CE, around the time Marcus Aurelius defeated several …
The Equestrian Statue of Marcus Aurelius is an ancient Roman statue in the Capitoline Hill, Rome, Italy.It is made of bronze and stands 4.24 m (13.9 ft) tall. Although the emperor is mounted, it exhibits many similarities to standing statues of Augustus.
The Equestrian Statue of Marcus Aurelius was mistakenly revered as a statue of who for many centuries? Constantine The Arch of Constantine commemorates Constantine's victory over whom?
One of the very few surviving equestrian statues from Rome was of Emperor Marcus Aurelius who died in 180 of an illness. His horse in that statue has one foreleg up in the air. There is no record of Marcus Aurelius ever being wounded in battle and as a prominent Roman and eventual Emperor, it’s unlikely he saw much direct, close-up battle …
One of the oldest known equestrian statues in the United States is the 1853 statue of General Andrew Jackson in Lafayette Park, Washington D.C., which was made in celebration of Jackson's victory over the British at the Battle of New Orleans.
Material: The material of the statue is then decided by the client. The sculptor may also use a small clay model to better portray his conception of the design. The clay model can be modified to fine tune the client’s wishes.
Mini-Sculpture: Finally, the bronze sculpture artist may finalize the miniature model of the final design in order to give the client a preview into how the final product will look. This model is made using the material decided, and it can be used by the client for marketing purposes so that he can raise funds for the sculpture.
Creating the Backbone: The backbone of the bronze statue, also called the armature consists of a steel frame with foam added to it in order to resemble the rough outline of the final product. This is then sealed with a latex coat to secure it.
The Sculpting: The main work starts only now. Many pounds of hot clay are used and applied by hand to “block in” the design for the first time. The bronze sculpture artist then invests a lot of time adding more clay, removing some clay and molding the clay until the final product finally resembles the required design. Tiny details are added on to give more preciseness to the bronze statue and make it more real.
Remove dust with a damp cloth.
Do not use metal objects or wire brushes to clean the sculpture.
Do not apply abrasives or cleansers that will possibly scratch the finish.
ZUD – Non- Abrasive Cleaner. Use to remove stubborn stains. Zud cleans all metal surfaces including bronze. Zud can be used in powder or liquid form.
Lemon Oil – Apply a small amount of oil with a paintbrush or soft cloth. Cover the entire figure with oil. Wipe the surface gently with a soft cloth to take off the excess oil.
Paste Wax- A very thin, even coat of wax should be applied with a soft cloth. Allow the wax to sit and dry before polishing. Wax should be applied after bronze has been cleaned and dried. Do not apply if using lemon oil.
Do Nothing: Many bronze owners prefer to sit back and enjoy the natural reaction and aging process of their sculpture.
What kind of sculpture is right for me?
We have a tremendous inventory of existing designs and unique items that we have been collecting for many years. After reviewing the website, Contact Us if you are unable to find what you are looking for.
Ancient Sculpture Gallery is proud to present you with lost wax bronze reproductions of statues and busts from the Egyptian, Greek, Hellenistic, Roman, Asian Oriental, and Western civilizations. “Lost Wax” bronze (or hot-cast bronze) is actually 100% pure Bronze – essentially copper and tin. The making of a “lost wax” bronze is a complex and time consuming process, and specific technical expertise is needed to accomplish the task of making a bronze. The most known and used process for making “lost wax” involves pouring of molten bronze. This is the same method used by the ancient civilizations to create bronze sculptures. Our lost wax bronze sculptures are produced in this same technique.